Manual

Instruction Manual
3
1. Plug a monitor into the Console DisplayPort connector; plug a USB keyboard and a USB
mouse into the dedicated USB keyboard and mouse ports on the KVM switch.
2. Use a male-to-male DisplayPort video cable to connect the DisplayPort connector on the
computer’s video card, to one of the KVM’s PC ports (ie. PC1)
3. Use a USB type A-B Cable to connect the KVM’s USB port (type B, square connector) for the PC
port used in Step 2, and the USB port on the computer (type A, at connector).
4. Repeat for Steps 2 and 3 for each PC port on the KVM switch, or each computer you wish to
use on the KVM