Instruction manual

3
*installation pictures are representations only
Plug a monitor into the Console’s DisplayPort connector; plug a USB 1.
keyboard and a USB mouse into the dedicated USB keyboard and
mouse ports on the KVM switch.
Use a male-to-male DisplayPort video cable to connect the 2.
DisplayPort connector on the computer’s video card, to one of the
KVM’s PC ports (ie. PC1)
Use a USB type A-B Cable to connect the KVM’s USB port (type B, 3.
square connector) for the PC port used in Step 2, and the USB port
on the computer (type A, flat connector).
Repeat for Steps 2 and 3 for each PC port on the KVM switch, or 4.
each computer you wish to use on the KVM.