Specifications

Instruction Manual
1
Introduction
Packaging Contents
• 1 x SV231DD2DUA or SV431DD2DUA KVM switch
• 1 x Power Adapter
• 1 x Instruction Manual
System Requirements
• DVI enabled computer system/video card
• USB enabled computer system
• DVI enabled display devices (e.g. monitor, projector, TV, etc.)
• A standard 104-key wired USB keyboard
• A standard 3-button wired USB mouse
Installation
NOTE: Prior to the installation, please power o all devices that will be connected to this
system. Ensure that all devices you will connect are properly grounded. Place cables away from
uorescent lights, air conditioners, and machines that are likely to generate electrical noise. If
you experience any problems using a USB KVM switch, the following BIOS setup changes may be
necessary for PC users and not necessary for Mac users:
• Set HALT ON ERROR to ALL BUT KEYBOARD.
• In PNP AND PCI SETUP, set PNP OS INSTALLED to YES and set USB IRQ to ENABLED.
Dierent systems may use dierent naming, so contact your system manufacturer for further
assistance with these settings.