Datasheet

Hot Key Configuration
This setting configures custom key configurations that you can use to switch between
PCs on the KVM. By default, the [Ctrl] + [Alt] + [1] hotkey sequence is active, where
the [1] key is the number of the KVM port you wish to access. To use the custom hotkey
feature, all keys must be pressed simultaneously. You can change the command key
from the default to any letter or number on the keyboard. Control keys such as [Tab],
[Esc], and [Num Lock] cannot be used.
Turn On Buzzer
When checked, activates the audible notification when the port is changed.
Fix Audio Port at PC
When checked, locks audio input to the selected port regardless of which KVM port is
active. When unchecked, audio input is selected along with the KVM port.
Auto Scan Period
Sets the amount of time the Auto Scan feature will wait between switching ports.
Selectable between 10 ~ 60 seconds.
NOTE: Although there are options to change hotkeys for ports 3 and 4, they are inactive
on this product.
Instruction Manual
4