Datasheet

Introduction
Thank you for purchasing a StarTech.com Mini KVM switch featuring “built-on-cables”
and audio support. This ultra-compact device lets you control two computers from one
keyboard, monitor, mouse while keeping your desk space free. Your
SV211MICRA/SV221MICUSB KVM switch even lets both computers share a speaker and
microphone.
Features
2 Port Starview Mini KVM Switch (SV221MICRA)
Compact design with unique built-on cable technology
Automatically switch between 2 computers using the hotkey commands or at the
push of a button
Supports MS Intellimouse, Explorer and Optical Mouse
•Designed to integrate into your existing IT infrastructure
No additional software required
Plug and Play support allows users to change computers without any interruptions
Shares microphone and speakers between both connected computers
Supports high VGA resolution of up to 1920 x 1440
•Provides error-free system booting and PS/2 keyboard and mouse emulation
•No external power source required
•Ensures secure connections using integrated KVM cables
Compatible with all operating systems
Backed by StarTech.com’s one year warranty
2 Port Starview USB Mini KVM Switch (SV221MICUSBA)
Compact design with unique built-on cable technology
Switch automatically between 2 computers using the hotkey commands or at the
push of a button
Supports USB enabled keyboard and mouse emulation for error-free PC bootup
•Designed to integrate into your existing IT infrastructure
No additional software required
Plug and Play support allows users to change computers without any interruptions
Shares microphone and speakers between both connected computers
Supports high VGA resolution of up to 1920 x 1440
•No external power source required
•Ensures secure connections with integrated KVM cables
Compatible with all operating systems
Backed by StarTech.com’s one year warranty
2
5
Troubleshooting
If you are experiencing any difficulties, first make sure that all your cables are
connected to their proper ports and are firmly seated.
My SV221MICRA/SV221MICUSBA keeps switching between my computers.
The switch is likely in auto-scan mode. In auto-scan mode, the switch will toggle
between computers after a set interval and the LEDs will be flashing. To exit or
terminate Auto-scan mode, press any key on keyboard.
I can not switch between computers.
You are likely using the wrong hotkey combination. Review the chart on page 4 and
make sure you are using the Scroll Lock control key. Hotkey sequences must be
completed within 3 seconds to be valid.