Instruction manual
Instruction Manual
32
Main Menu
To access the main menu, quickly press F7 twice quickly. You must press the key twice
within one second. If you press it once or too slowly, then the F7 key(s) are sent to the
host, just like any other key. This is the only way to get into the menu system, if the
Bribar is disabled. Here is the main menu for a typical system:
The main menu window may be moved by clicking and dragging on the title bar. It can
be closed by pressing Escape, or by clicking on the red X in the top right corner. Here
is a guide outlining various elds from the Main Menu. Most of the functions operate
immediately. Other functions require a response to a conrmation prompt rst before
performing the requested function.
• Identication: Fixed text label that is dened by the user in the Web interface. This does
not aect the operation of the system and is intended to assist with administration.
• Status: Current status of the attached system and the status of the unit.
• B/W Min/Avg/Max/Auto: Bandwidth control. Current operation will be indicated
with white highlighting. If you choose Min/Avg/Max then you will override the
default, Auto. As the automatic mode measures actual network performance, you
may see the current mode switch from Min up to Avg or Max. The dierent modes
indicate moretime spent on compression versus more bandwidth. There is no visual
dierence between the modes, but there can be a noticeable dierence in speed
and smoothness.
• Mouse Resync: Resynchronizes the mouse pointer so that the local and remote
mouse pointers are on top of each other.