Instruction manual
Instruction Manual
40
Disable Local Authentication
Selecting this option will disable login authentication locally on the SV1108IPEXT/POW.
The switch can only be accessed using LDAP, LDAPS, MS Active Directory, RADIUS or CC
Management authentication.
RADIUS Settings
To allow authentication and authorization for the SV1108IPEXT/POW through a
RADIUS server, do the following:
1. Check Enable.
2. Fill in the IP addresses and port numbers for the Preferred and Alternate
RADIUS servers.
3. In the Timeout eld, set the time in seconds that the SV1108IPEXT/POW waits for a
RADIUS server reply before it times out.
4. In the Retries eld, set the number of allowed RADIUS retries.
5. In the Shared Secret eld, key in the character string that you want to use for
authentication between the SV1108IPEXT/POW and the RADIUS Server.
6. On the RADIUS server, set the access rights for each user according to the
information in the table below:
Character Meaning
C
Grants the user administrator privileges,
allowing the user to congure
the system.
W
Allows the user to access the system via
the Windows Client program.