Instruction manual

Instruction Manual

Log Server

Important transactions that occur on the SV1108IPEXT/POW, such as logins and

internal status messages, are kept in an automatically generated log le

Specify the MAC address of the computer that the Log Server runs on in the MAC

address eld.

Specify the port used by the computer that the Log Server runs on to listen for log

details in the Port eld. The valid port range is 1–65535. The default port number

is 9001.

NOTE: The port number must dierent than the one used for the Program port

SNMP Server

To be notied of SNMP trap events, do the following:

1. Check Enable SNMP Agent.

2. Key in the IP address and the port number of the computer to be notied of SNMP

trap events. The valid port range is 1-65535.

NOTE: The following SNMP trap events are sent: System Power On, Login Failure, and

System Reset.