Instruction manual
Instruction Manual
34
Network
The Network dialog is used to specify the SV1108IPEXT/POW’s network environment.
Service Ports
If a rewall is being used, the Administrator can specify the port numbers that the
rewall will allow (and set the rewall accordingly). If a port other than the default is
set, users must specify the port number as part of the IP address when they log in. If
not, an invalid port number (or no port number) is specied, the SV1108IPEXT/POW
will not be found.
An explanation of the elds is given in the table below:
Field Explanation
HTTP
The port number for a browser login.
The default is 80.
HTTPS
The port number for a secure browser
login. The default is 443.
Telnet Port
The port for Telnet access. The default
is 23.