Owner manual
Instruction Manual
42
Login to your router’s setup and look for a page called Port Forwarding. it should look similar to
this:
5. If a static IP address was assigned to the SV1107IPEXT, enter it in the space provided.
If you are using Automatic addressing, click on the drop down arrow labeled Computer Name
and select the SV1107IPEXT by name.
6. In the Ports to Open [TCP] space, enter 9000, 9002 (or the port numbers you chose) and set
the schedule. Activate Port Forwarding by placing an X in the box on the extreme left.
7. Save your changes and restart the router.
8. When the router has rebooted, start your browser and enter your DYNDNS host name. You
should now be able to connect to the SV1107IPEXT from the Internet.
9. Restore your network Firewall and make any conguration changes if necessary