Owner manual
Instruction Manual
25
Firmware
As new versions of the SV1107IPEXT rmware become available, they can be downloaded from
our website.
Check the website regularly to nd the latest information and packages.
To upgrade the rmware, do the following:
1. After downloading the new rmware le to your computer, open your browser and login to
the SV1107IPEXT. Click the Firmware icon, to bring up the Firmware File dialog box:
2. Click Browse, then navigate to location of the new rmware and click on the new rmware
le.
3. Click Upload.
4. After the upload completes, click the Apply icon at the left side of the web page.
Parameter Explanation
Time out Control
If the SV1107IPEXT does not receive any input from a
computer that is accessing it with either client within the
specied time, the connection terminates.
Login failure
Login failures allowed: Sets the number of consecutive
failed login attempts permitted
Login failure timeout: Sets the amount of time a
remote computer must wait before attempting to login
again after it has exceeded the number of allowed
failures.
Working Mode
Enable stealth mode: With stealth mode enabled, the
SV1107IPEXT will not reply to a ping request.
Reset on exit
A check here causes the SV1107IPEXT to reset itself and
implement all the new changes when you log out. A wait
of approximately 30 to 60 seconds is necessary before
logging in, following the reset.