Owner manual
Instruction Manual
17
Network
The Network dialog is used to specify the SV1107IPEXT’s network environment.
Access Ports
If a rewall is being used, the Administrator can specify
(in the rewall set up) the port numbers that it will
allow. When connecting to the SV1107IPEXT, users must
specify the port number as part of the IP Address.
If an invalid port number (or no port number)
is specied, the SV1107IPEXT will not be found.
(i.e 192.168.0.60 / 9000 for the Windows client,
192.168.0.60/9002 for the Java client.)
Please Note:
If there is no rewall (on an Intranet, for example),
these numbers will not have any eect.
The access ports cannot have the same value.
A dierent value must be set for each one.
Explanations of the elds are given in the table below:
Field Explanation
Program
This is the port number that must be specied when connecting
from the Administrator and Windows Client. Valid entries are
between 1024 -60,000