7 Port USB 3.0 Dedicated Charging Hub - 5 x 1A, 2 x 2A ST7CU35122 *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Diagram.....................................................................................1 Introduction.............................................................................................2 Packaging Contents.................................................................................................................................. 2 System Requirements...................................................................................................................
Product Diagram Power On/Off Button DC Jack Power LED USB Charge Ports NOTE: The ST7CU35122 Charging Hub is designed with an Intelligent Control Chipset, which can detect the required charging mode of the different devices connected, and switch to the proper mode for “Full Speed charging” of that device(E.g.
Introduction Packaging Contents • 1x USB Charging Hub • 1x Wall Mount Brackets (w/screws) • 4x Rubber Feet • 1x Universal Power Adapter (NA/UK/EU) • 1x Instruction Manual System Requirements • Available wall outlet Instruction Manual 2
Installation WARNING! Do Not Connect Devices which do not require charging into the charging ports of this device (e.g. USB Flash Drives, Card Readers, etc.) 1. Connect the included power adaptor to an AC outlet, then to the device. 2. Press the power button to turn the device on. Once the power LED is lit, it can charge devices. 3. Connect your device(s) to the corresponding port of the charging station (1A or 2A), according to the charging requirement your device(s). NOTE: a.
Apple Mode definition: Apple Mode is a proprietary charging mode developed by Apple, which redefines the other two pins of the USB connector, enabling them to send current and increase charging speed (same theory as DCP mode in BC 1.2 version, but with different voltage levels on the pins). Detailed as follows: 1A Mode: VCC:5V/GND:5V/D+:2.0V/D-:2.7V (compatible with Apple products that need 1A current input, such as iPhones, IPods and iPads) 2A Mode: VCC:5V/GND:5V/D+:2.7V/D-:2.
Specifications Industry Standards USB Battery Charging Specification Rev. 1.2 Ports 7 Connector(s) 7 x USB A (4 pin) Female Color Black Enclosure Material Aluminum Dimensions (LxWxH) 110 x 45 x 24 mm Weight 4.5 oz [127 g] LEDs 1 x Power Power Adapter 100-240V / 1.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
