Instruction manual
Instruction Manual
5
1. Adjust the local computer to a lower resolution and refresh rate until all remote
displays show an image.
2. Gradually increase the resolution and refresh rate on the local computer until one
(or more) remote displays ceases to display an image.
3. Return the resolution and refresh rate on the local computer to the highest
resolution and refresh rate setting that displayed an image on all remote displays.
NOTE: If you are still unable to see an image on a remote display after trying the above
solutions, it is recommended that you verify the Category 5 Ethernet cable installation
to the remote display before calling technical support. This can be done using a
standard cable tester. If you do not have a cable tester, contact a local computer
service or wiring professional.
Specications
Resolution Up to 1280x1024 @60Hz (can be
aected by overall cable length)
Sync TTL Compatible
Horizontal/Vertical Sync Polarity Positive/Negative
System Cable Maximum Distance Category 5 Shielded FTP Cable 1000 feet
(300 meters)
Connectors ST124UTPE: 4 x Cat. 5
1 x HD-15 VGA (in)
1 x HD-15 VGA (out)
ST128UTPE: 8 x Cat. 5 (out)
1 x HD-15 VGA (in)
1 x HD-15 VGA (out)
Power External Adapter: 12V DC 600mA
Dimensions (LxWxH) mm ST124UTPE: 130 x 83.5 x 29.5
ST128UTPE: 200 x 83.5 x 29.5
Weight ST124UTPE: 247g
ST128UTPE: 345g