4 Port VGA Video Extender over Cat 5 (UTPE Series) ST124UTPE ST128UTPE *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Installation..........................................................................
Introduction Thank you for purchasing a StarTech.com VGA Cat5 Splitter/Extender. Combined with one or more StarTech.com remote receivers (STUTPRXL - sold separately), you can display the image from a computer or other VGA image source on multiple remote displays at distances of up to 1000 feet (300 meters). With no drivers or software to install, this VGA Extender offers simple setup and crystal-clear images at resolutions of up to 1280 x 1024 pixels.
Installation The VGA Extender is composed of two different units: the ST124UTPE(4- port)/ ST128UTPE(8-port) Extender and Splitter, along with a STUTPRXL Remote Receiver (available seperately). The VGA Extender takes the output from a VGA source (usually a computer) and transmits it to one or more Remote Receivers over Category 5 Ethernet cable.
Installing the VGA Extender and Splitter (local) Step 6 (See Below) Front Back Step 3 (See Below) Step 4 (See Below) Step 7 (See Below) *ST128UTPE shown 1. Place the VGA Extender (ST128UTPE/ST124UTPE) near the local computer. 2. Switch off the computer. 3. Connect the data cable from the local computer display to the OUTPUT port on the VGA Extender. 4. Connect the HD15 male-to-male VGA cable (provided) to the INPUT port on the VGA Extender. 5.
Installing the Remote Receiver Module 1. Connect the Remote Receiver to the Ethernet cable connection from the VGA Extender, marked Cat. 5. 2. Connect the data cable from the display to the opposite side of the receiver, marked VGA OUT. 3. Repeat steps 1 and 2 at each remote display location. 4. Connect the AC Adapter (provided with remote unit) into an appropriate power source and plug the opposite end into the DC/12V port on the Remote Receiver.
1. Adjust the local computer to a lower resolution and refresh rate until all remote displays show an image. 2. Gradually increase the resolution and refresh rate on the local computer until one (or more) remote displays ceases to display an image. 3. Return the resolution and refresh rate on the local computer to the highest resolution and refresh rate setting that displayed an image on all remote displays.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
