User Manual
Instruction Manual
2
Installation
The following examples illustrate the conguration options for the distribution
amplier, when used with a HD component video source (YPbPr), HD RGBHV video
source, or composite video source.
Prior to installation, please situate the distributor near the video signal sources, as well
as an available power outlet, in order to minimize cabling requirement.
ST123HDA used with HD component video source (YPbPr)
Using a standard component/YPbPr cable, you can connect your video source to the
distribution amplier, to be used with up to three displays:
Connecting the A/V source to the distribution amplier
1. Insert the connectors from one end of a standard component video cable to the
color-coded output ports located on the A/V source.
2. Connect the remaining end of the component cable to the corresponding ports,
(marked INPUT) on the rear panel of the distribution amplier. The necessary ports
are labelled Pr/R/V, Pb/B/V2 and Y/G/V1.
Front Panel
Rear Panel
Diplay #1 Video Source #1Diplay #2Diplay #3
Front Panel Rear Panel