High Resolution Video Splitter User's Manual ST122PRO ST124PRO ST128PRO
Introduction The StarTech.com ST122PRO, ST124PRO and ST128PRO Video Splitters broadcast and boost one VGA signal source for 2, 4 or 8 VGA monitors respectively. There is no software or interface card to install. Just connect the cables, power up the system and you are ready to have duplicated VGA images for multiple monitors with excellent quality. Superb highbandwidth circuit enables a high resolution VGA signal of up to 300Mhz (with the ST122PRO and ST124PRO) to be displayed on multiple monitors.
Connection One length of HDB15 male-to-female cable is required to connect from the Video Splitter Input to a computer’s VGA output. Multiple monitors should be connected to the Video Splitter’s output port as shown below.
Figure 3: ST128PRO Connection Operation ACTIVE LED turns on when there is a VGA signal at the Input port. POWER LED turns on when the Video Splitter is powered up by the AC 9V power adapter.
Specifications ST122PRO ST124PRO ST128PRO No. of VGA output Signal bandwidth Signal Type LED 2 4 8 350 MHz 350 MHz 300 MHz VGA, SVGA, Multisync POWER (green) x 1 ACTIVE (amber) x 1 Cable Length 65M (210ft.
