Instruction manual

6
Situate the Transmitter Unit so that it is near your VGA video source 1.
as well as an available power source.
Connect the Transmitter to the power source, using the power 2.
adapter provided.
Connect the VGA video source to the VGA IN port on the 3.
Transmitter, using a standard male-female VGA cable.
Situate the Extender Unit up to 150m (492ft) away from the 4.
Transmitter unit, ensuring that the Extender Unit is able to connect to
an available power outlet.
OPTIONAL: with the optional mounting brackets (StarTech.com ID:
ST121MOUNT), any ST121 series receiver can be securely mounted
to a surface or the back of a VESA compliant flat-panel display.
Using a standard UTP cable with RJ45 terminators on each end, 5.
connect the Cat5 OUT port provided by the Transmitter Unit to the
Cat5 IN port provided by the Extender Unit.
Connect the Extender Unit to an available power outlet, using the 6.
adapter provided.
OPTIONAL:7. You can connect two monitors directly to the Extender
Unit. To do so, simply connect the monitors to the MONITOR OUT
ports on the Extender Unit.
Repeat step 4 to 7 for each Receiver Unit that will be used in 8.
conjunction with an Extender (up to 4).
Situate the Receiver Unit up to 150m (492ft) away from the Extender 9.
Unit, so that it is near the intended display(s) as well as an available
power source.