Instruction manual

1
Introduction
The StarTech.com Converge A/V VGA over Cat5 Video Extender
system is comprised of a transmitter unit (ST1214T/ST1218T) and
a receiver unit (ST121R) and optionally a repeater unit (ST121EXT).
This video extender system allows you to split and extend a single
VGA source signal to up to four or eight separate remote locations.
The VGA signal is extended using standard Cat5 UTP cable, with
a maximum distance of up to 150m (492ft) or 300m (984ft) with a
repeater.
Packaging Contents
1 x ST1214T/GB/EU 4-port Transmitter Unit •
or
1 x ST1218T 8-port Transmitter unit
or
1 x ST121R/GB/EU Receiver Unit
or
1 x ST121EXT/GB/EU Extender (Repeater) Unit
1 x Universal Power Adapter•
1 x Mounting Bracket kit (ST121R/GB/EU, ST121EXT/GB/EU only)•
1 x Instruction Manual•
System Requirements
VGA enabled video source and display•
Available power outlet at local and remote locations•
Both a Transmitter Unit and Receiver Unit(s)•