Instruction manual

7
Connect the Receiver Unit to the power source using the power 10.
adapter provided.
Using a standard UTP cable with RJ45 terminators on each end, 11.
connect the Cat5 OUT port provided by the Extender Unit to the
Cat5 IN port provided by Receiver Unit.
NOTE: Each Receiver Unit can be connected to two separate displays
simultaneously. To connect two monitors, simply connect a VGA cable
from the second Monitor Out port to a second display.
The following diagram illustrates the connection between Transmitter
and Receiver units, with the addition of an Extender Unit. Please note
that although only one Extender is used in this illustration, up to four
can be used simultaneously.
Video Source
VGA cable
Cat5 cables
(max 150m)
Remote
Displays
ST1214T
ST121R
ST121EXT
ST121R