Owner manual

Instruction Manual
5
5. Connecttheremotedisplay(s)tothe“MonitorOut”portslocatedontheReceiver
UnitusingaVGAmale/malecable.EachReceiverUnitsupportstwomirrored
(identical)VGAoutputs.
6. ConnecttheTransmitterUnittoeachReceiverUnit,usingstandardRJ45terminated
Cat5cable(see“PreparingYourSite”).
OPTIONAL:IfusingtheST121EXTExtenderUnit(s),thedistancebetweenthe
TransmitterandReceiverunitscanbeextendedbyuptoanadditional150m/492ft.
TheST121EXTalsosupports2VGAoutputsandrequiresanACelectricaloutlet.
7. Connectthepoweradapters(provided)tobothTransmitterandReceiverUnits.
8. Turnonthedisplaydevicerst,followedbythevideosource.
Driver Installation
Nodriverorsoftwareinstallationisrequiredonthevideosourcedevice.
Operation
TheST1212TprovidesLEDindicators,allowingsimpleoperatingstatusmonitoring.
Oncethepoweradapterhasbeenconnected,thePowerLEDwillbecomeilluminated;
similarly,whentheunitisinuse(i.e.transmittingavideosignal),theActiveLEDwill
becomeilluminated.