Owner manual

Instruction Manual
4
Installation
ATTENTION!
For the best results, please ensure the video extender units and any
display equipment are properly grounded. Improper grounding may
result in signal noise or potential damage to the extender units.
Hardware Installation
ST1212T
ST121R
1. Turnothevideosource(i.e.computer)andtheintendeddisplaydevices(i.e.
monitors).
2. PositiontheST121RReceiverUnit(s)(soldseparately)neartheintendedremote
display(s).
OPTIONAL:withtheoptionalmountingbrackets(StarTech.com ID: ST121MOUNT),
anyST121seriesreceivercanbesecurelymountedtoawallorothersurface.
*installation photos are for reference only
3. PositiontheST1212TTransmitterUnitnearthevideosource.
4. Connectthevideosourcetothe“Input”maleVGAconnectorontheTransmitter
Unit,usingastandardVGAmale/femalecable.Alocaldisplaycanbeconnectedto
the“MonitorOut”VGAconnectorontheTransmitterUnit.