2 Port PCI Express Gigabit Ethernet Network Card ST1000SPEXD3 *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Installation..........................................................................
Introduction Packaging Contents • • • • 1 x PCI Express Network Card 1 x Low Profile Bracket 1 x Driver CD 1 x Instruction Manual System Requirements • An available full/low profile PCI Express expansion slot • Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, Windows® Server 2008 R2, 2003(32/64), Mac OS 10.4 - 10.
Installation WARNING! PCI Express cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your PCI Express card. StarTech.com recommends that you wear an anti-static strap when installing any computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds.
3. Enter the folder “LAN”, then “Realtek”, then “RealtekRTL8111B_8111C_8111E”, followed by your operating system version and double-click the “Setup.exe” file in that folder. 4. This should launch the driver Installation wizard. Continue through the wizard and once complete, all the necessary drivers will be installed. Windows Vista/7/8/Server 2008 R2 1.
Specifications Host Interface PCI Express revision 2.0 (x1 slot connector) Form Factor Full Profile bracket installed, Low Profile included Chipset ID Realtek RTL8111E & PLX PEX8608 Maximum Data Transfer Rate 2000 Mbps (full-duplex), 1000 Mbps (half-duplex) Storage Temperature -20°C ~ 85°C (-4°F ~ 185°F) Humidity 5% ~ 95% RH Dimensions 88mm x 64mm Compatible Operating Systems Windows 2000/XP/Server 2003/Vista/ Server 2008 R2/7 (32/64-bit)/ 8 (32/64-bit) Mac OS 10.4-10.8, Linux kernel 2.4.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
