Owner manual

Instruction Manual
6
e. Slide the M.2 connector on the SSD into the M.2 reciprocal connector on the drive
tray.
f. Press the drive down toward the drive mounting stando, and drive the removed
screw through the mounting hole on your SSD drive and into the drive mounting
stando using the included Philips head screw driver.
Your M.2 SSD is now installed in the internal drive tray.
4. Slide the internal drive tray back into the enclosure so that the USB 3.0 Micro B
connector is facing outward, and place back into position so that the mounting
holes line up.