Owner manual
Instruction Manual
2
Introduction
Packaging Contents
• 1 x USB 3.0 SATA HDD/SSD Enclosure
• 1 x USB 3.0 Cable
• 1 x SSD Mounting Screw and Stando
• 1 x Mini Screw Driver
• 1 x Instruction Manual
System Requirements
System Requirements
• Computer system with available USB 3.0 (5 Gbit/s) port or USB 2.0 port (480Mbps)
• M.2 NGFF SATA SSD Drive
Tool Requirements
• 5mm nut driver or small plyers
• Size 1 (PH1) Philips head screw driver