UNIDOCK2U Instruction Manual Serial ATA Hard Drive Docking Station USB to SATA, IDE External Hard Drive Docking Station for 2.5” or 3.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction...................................................................... 1 Packaging Contents.....................................................................1 System Requirements..................................................................1 Installation........................................................................ 1 Front View.....................................................................................2 Rear View.......................................
Introduction This external SATA and IDE hard drive docking station provides full and instant access to any 2.5in or 3.5in IDE and SATA (SATA 1.5Gb/s or 3.0Gb/s) hard drive up to 2 TB without having to mount the hard drive inside a computer or enclosure.
Front View Power button SATA drive slot LP4 Molex power connector Rear View 40-pin IDE connector Power Connector USB connector 2 Drive Eject button
Hardware Installation 1. Plug the power and USB cable from the rear side of the hard drive dock to a power outlet and the USB port on the computer respectively. 2. If connecting a SATA hard drive, simply insert the drive, into the top loading slot on the hard drive dock. Make sure the connectors on the hard drive face the same corner as the cut-out in the drive slot door. 3. If connecting a 3.
Using the Hard Drive Dock Windows 2000/XP/Vista/7 If you are using a brand new hard drive that does not contain any data, then you will first need to prepare the hard drive for use. From the main desktop, right-click on “My Computer” (“Computer” in Vista), then select Manage. In the new Computer Management window, select Disk Management from the left window panel.
If you are installing a hard drive that already has data on it, then after plugging it in, the drive should automatically show up with a drive letter assigned within “My Computer”. You can verify or change the drive letter through Disk Management, as outlined above.
Specifications Bus Interface USB 2.0 Front 1 x 40-pin IDE male 1 x 4-pin LP4 molex Top 1 x 7+15 SATA Connectors Rear 1 x USB type B 1 x Power Adapter Chipset JMicron JM20337 Hard Drive Compatibility 2.5” or 3.5” SATA 1.5 or 3.0 Gb/s with max capacity of 1.5TB Power Adapter 12VDC, 3A, center positive Dimensions 145.0mm x 93.0mm x 145.0mm Weight 413g Compatible Operating Systems Windows 2000/XP/Vista/7, Mac OS 9.2 or later, Linux 2.5” or 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
