USB 3.0/eSATA to SATA III Hard Drive Dock w/UASP SDOCKU33EBV *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 Recommended System Requirements............................................................................................... 1 Product Diagram.....................................................................................
Introduction Packaging Contents • 1 x USB 3.0/eSATA hard drive docking Station • 1 x USB 3.0 Cable • 1 x eSATA cable • 1x Universal Power Adapter (NA/UK/EU) • 1x Instruction Manual WARNING: Hard drives and docking stations require careful handling. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and docking station with caution.
Product Diagram Front View 1. Power / activity LED 2. SSD/HDD Slot 1 2 Rear View 3. Power switch 4. Power adapter port 5. USB 3.0 port 6.
Docking Station Installation 1. Connect the Dock to an available power outlet, using the provided power adapter. 2. Connect the Dock to your computer system, using the provided USB or eSATA cable. Drive Installation 1. Carefully align and insert the 2.5” or 3.5” SATA drive you wish to dock in the HDD/ SSD slot on the docking station, such that the SATA power and data connectors on the drive are properly aligned with the corresponding connectors inside the hard drive slot. 2.
Drive Removal WARNING: Ensure your hard drive has been disconnected from your computer operating system prior to attempting drive removal. Failure to properly disconnect your drive may result in lost data or drive damage. (See Disconnecting the Hard Drive in Docking Station Operation for further instructions.) 1. Turn off the docking station by pressing the power switch to the off position. 2.
Note: GPT (GUID partition) is required for drives larger that 2TB but is not compatible with some older operating systems, while MBR is supported by newer and older operating systems. 3. Once initialized, locate the Disk that says it is “Unallocated” (check the listed hard drive capacity to confirm it’s the correct hard drive) and then right-click in the section that says “Unallocated” and select “New Partition”. 4. Follow the on screen prompts to initialize the drive in the format of your choice.
Specifications USB 3.0 Host Interface eSATA 1 x USB 3.0 B female External Connectors 1 x eSATA female 1 x SATA DATA (7 pin) + Power (15 pin) Receptacle Internal Connectors USB 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
