Owners manual

faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a
SATA III solid state drive.
Applications
Disc sector imaging/cloning to create an exact replica of a source drive onto a different drive
Create identical backups for system builds that require the same drive image
Quickly access bare and swap hard drives for data backup/recovery
Features
1:1 hard drive duplicator and docking station
Supports both 2.5" and 3.5" form factor hard drives (HDD) and solid state drives (SSD)
eSATA and USB 3.0 host interface connections
Standalone sector-by-sector hard drive duplication with speeds up to 22GB per minute
Support SATA III (6 Gbps) and UASP for optimal performance
Supports dual drive capacity up to 4 TB per slot (8 TB in total)
Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives
Compatible with USB 3.0/2.0/1.1 (5 Gbps / 480 Mbps / 1.5 Mbps)
Dual bay, top slot-loading design with drive doors