eSATA USB to SATA Standalone Hard Drive Duplicator Dock SATDUPUE SATDUPUEEU SATDUPUEGB *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Top View...............................................................................
Introduction The SATDUPUE Portable SATA Duplicator with eSATA and USB allows for standalone duplication/cloning of a SATA hard drive, or connected to a computer system for use as an external hard drive dock. As a duplicator, you can create an exact 1-to-1 sector clone from one hard drive to another, including partition, boot sector information and all data, at a rate of 72 MBps.
Top View Progress Bar (DUP)/ Drive Activity (PC) LED Start Duplication Button Drive Detect LED (Source) Mode Selection Button USB mini-B Connector Mode Indicator LED Power Connector Drive Detect LED (Destination) Power Button Side View SATA Data/Power connector (Source) SATA Data/ Power connector (Destination) eSATA Connector *actual product may vary from photos Instruction Manual 2
Installation Hardware Installation JBOD (PC) Mode 1. Connect the external power adapter to the portable duplicator. 2. Connect 1 or 2 hard drives to either drive connector on the duplicator. If only connecting a single hard drive, connect it to the “Destination” connector. 3. Power on the hard drive dock by pressing the power switch located near the power adapter connector. 4. The Power LED should be green to indicate JBOD mode. Press and hold the Mode button for 3 seconds to switch modes if necessary. 5.
Driver Installation Windows 2000/XP/Vista/Server 2008 R2/7, Mac OS X, Linux No driver installation is required for the supported operating systems, as this hard drive dock is natively supported, so the drivers are already installed.
Specifications Number of Drives 2 USB 2.0 Host Interface SATA revision 2.0 Chipset ID JMicron JMB352U 1 x USB type Mini-B female External Connectors 1 x 7-pin eSATA male 1 x DC Power 1 x Mode Indicator LEDs 2 x Drive Power/Activity 1 x Progress Bar 2.5” and 3.5” SATA hard drive and solid state drives Hard Drive Compatibility USB 2.0: 480Mbps Maximum Data Transfer Rate eSATA: 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
