Instruction manual

1
Introduction
The SATDUPUE Portable SATA Duplicator with eSATA and USB allows
for standalone duplication/cloning of a SATA hard drive, or connected
to a computer system for use as an external hard drive dock.
As a duplicator, you can create an exact 1-to-1 sector clone from one
hard drive to another, including partition, boot sector information and
all data, at a rate of 72 MBps. While as an external hard drive dock,
it support plug-and-play installation and can be connected to a host
computer through USB 2.0 or eSATA, providing data transfer speeds
up to 480 Mbps or 3 Gbps respectively.
Packaging Contents
• 1 x Portable Duplicator
• 1 x USB 2.0 Cable - 1m
• 1 x Power Adapter
• 1 x Instruction Manual
System Requirements
• 2.5in and/or 3.5in SATA hard drive or solid state drive(s)
• Available AC electrical outlet
• Drive Dock Operation:
• Available USB 2.0 or eSATA* port
*Port Multiplier support recommended
• Microsoft
®
Windows
®
2000/XP/Server 2003/Vista/Server 2008
R2/7 (32/64-bit), or Apple
®
Mac OS
®
X, or Linux
®