SATDUPUE SATDUPUEGB SATDUPUEEU Instruction Manual Portable SATA Duplicator Portable SATA Duplicator with eSATA and USB Manual Revision:06/14/2011 For the most up-to-date information, please visit www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction...................................................................... 1 Packaging Contents..................................................................... 1 System Requirements.................................................................. 1 Top View....................................................................................... 2 Side View...................................................................................... 2 Installation......................
Introduction The SATDUPUE Portable SATA Duplicator with eSATA and USB allows for standalone duplication/cloning of a SATA hard drive, or connected to a computer system for use as an external hard drive dock. As a duplicator, you can create an exact 1-to-1 sector clone from one hard drive to another, including partition, boot sector information and all data, at a rate of 72 MBps. While as an external hard drive dock, it support plug-and-play installation and can be connected to a host computer through USB 2.
Top View Side View *actual product may vary from photos 2
Installation Hardware Installation JBOD (PC) Mode 1. Connect the external power adapter to the portable duplicator. 2. Connect 1 or 2 hard drives to either drive connector on the duplicator. If only connecting a single hard drive, connect it to the “Destination” connector. 3. Power on the hard drive dock by pressing the power switch located on the power adapter cable. 4. The Power LED should be green to indicate JBOD mode. Press and hold the Mode button for 3 seconds to switch modes if necessary. 5.
5. Once both drives are installed, press and hold the Start button for several seconds to begin duplication. The progress bar will indicate how much of the duplication is complete. Once complete, the entire bar will be lit solid. Driver Installation Windows 2000/XP/Vista/Server 2008 R2/7, Mac OS X, Linux No driver installation is required for the supported operating systems, as this hard drive dock is natively supported, so the drivers are already installed.
Specifications Number of Drives 2 USB 2.0 Host Interface SATA revision 2.0 Chipset ID JMicron JMB352U 1 x USB type Mini-B female External Connectors 1 x 7-pin eSATA male 1 x DC Power 1 x Mode Indicator LEDs 2 x Drive Power/Activity 1 x Progress Bar 2.5” and 3.5” SATA hard drive and solid state drives Hard Drive Compatibility USB 2.0: 480Mbps Maximum Data Transfer Rate eSATA: 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a two year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
