:1 HDD/SSD Duplicator with Image Library Backup & Restore SATDUP11IMG *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Diagram.....................................................................................1 Front View..................................................................................................................................................... 1 Rear View....................................................................................................................................................... 1 Introduction......................................................
Product Diagram Front View 7 1 6 2 3 5 4 1. Display Screen 2. UP Navigation Button 3. Down Navigation Button 4. OK button 5. Esc button 6. SATA SSD/HDD Source Port 7. SATA SSD/HDD Target Port Rear View 1 1. Power Switch 2.
Introduction Packaging Contents • 1:1 HDD/SSD Image Duplicator (SATDUP11IMG) • Long SATA cable (DATA+Power) • 2x Short SATA cable (DATA+Power) • eSATA + 12V Power Cable (Type M Power Connector) • eSATA + 5V Power Cable (Type F Power Connector) • 2x HDD/SSD Pads • Universal power adapter (UK/NA/EU) • Instruction Manual System Requirements • 1x SATA/eSATA Source Drive (HDD/SSD) • 1x SATA/eSATA Target Drive (HDD/SSD) Instruction Manual 2
Hardware Installation WARNING! Hard drives and drive duplicators require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and duplicator device with caution. Be sure that you are properly grounded by wearing an anti-static strap when handling computer components or discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds.
3. Connect your Target drive to the SATA SSD/HDD Target Port on the SATDUP11IMG. Note: The Target Drive can be a drive you intend to overwrite with another drive image, or an Image drive you intend to add an additional drive image to. a) If the target drive is a SATA HDD/SSD, use the included Long SATA cable or the included Short SATA cable depending on your preference.
2. Using the UP/DOWN Navigation buttons and the Display Screen, locate 1.HDD -> Image, on the [Copy] sub menu, and press the OK button. 3. The SATDUP11IMG will analyze the source drive and ensure the target drive is ready, by verifying size and format. a) If the target drive has not been formatted as an Image drive, the SATDUP11IMG will alert you on the display screen, Press the OK button. WARNING! Formatting your HDD/SSD will delete all data stored on the target drive.
Restore a HDD Image from an Image Library Drive WARNING! The drive attached to the Target port will be overwritten, deleting all data currently stored on the drive. Note: The target drive must be equal to or larger than the source drive Image. If the target drive is larger than the source drive image, any additional space will remain unformatted. 1. Using the UP/DOWN Navigation buttons and the Display Screen, locate 1.Copy from the on screen menu, and press the OK button, to access the [Copy] sub menu. 2.
1:1 Hard Drive Duplication WARNING! The drive attached to the Target port will be overwritten, deleting all data currently stored on the drive. Note: The target drive must be equal to or larger than the source drive. If the target drive is larger than the source drive, any additional space will remain unformatted. 1. Using the UP/DOWN Navigation buttons and the Display Screen, locate 1.Copy from the on screen menu, and press the OK button, to access the [Copy] sub menu.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
