:1 HDD/SSD Duplicator with Image Library Backup & Restore SATDUP11IMG *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Diagram.....................................................................................1 Front View..................................................................................................................................................... 1 Rear View....................................................................................................................................................... 1 Introduction......................................................
Product Diagram Front View SATA HDD Source Port Display Screen Navigation Buttons Ok Button Esc Button Rear View Power Switch Power Adapter Port Instruction Manual 1 SATA HDD Target Port
Introduction Packaging Contents • 1 x HDD Duplicator/Eraser • 2 x 10cm SATA Cables • 2 x 50cm SATA Cables • 1 x eSATA + 5V DC Type F Power Cable • 1 x eSATA + 12V DC Type M Power Cable • 1 x Power Adapter • 3 x Power Cords (NA, UK, EU) • 2 x HDD Pads • 1 x Instruction Manual WARNING! Hard drives and storage enclosures require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution.
2. Connect your Source drive to the SATA SSD/HDD Source Port on the SATDUP11IMG. Note: The Source Drive can be a drive you intend to make an exact copy of, or an Image drive containing several hard drive images. a) If the source drive is a SATA HDD/SSD, use the included Short SATA cable or the included Long SATA cable if the drive is installed into a PC chassis.
4. For added drive protection and heat insolation, place the source drive and target drive on top of each, of the included SSD/HDD Pads. 5. Set the Power Switch to the on position. The SATDUP11IMG is now ready to use.
User Menu Table of Contents 1.1 HDD > Image 1. Copy 1.2 Image > HDD 1.3 HDD > HDD 2.1 HDD > Image 2. Compare 2.2 Image > HDD 2.3 HDD > HDD 3.1 HDD > Image 3.2 Image > HDD 3. Copy+Compare 3.3 HDD > HDD 4.1 Show HDD Info 4.2 Show Image Info 4.3 Rename Image 4. Image Manager 4.4 Delete Image 4.5 Format HDD #2 (Setup Image Drive) 5.1.1 Model Number 5.1.2 Version of Firmware 5.1.3 Serial Number 5.1 Show HDD Info 5. Utility (Select Device 1 or Device 2 depending on your preference) 5.1.
User Menu Table of Contents 6.1.1 System and Files 6.1 Copy Area 6.1.2 ALL Partitions 6.1.3 Whole HDD 6.1.4 Percentage 6. Setup 6.2 Skip Error 6.3 Language 6.4 Advanced Setup 6.4.1 Unknown Format 6.4.2 Stop Motor Time 6.5 Restore Defaults Hardware Operation 1. Copy The copy section of the menu enables you to create exact duplicates of entire drives, our use your Image drive to copy a specific drive image from your image drive. As well as add drive images from hard drives to your image drive.
2. Using the UP/DOWN Navigation buttons and the Display Screen, locate 1.HDD -> Image, on the [Copy] sub menu, and press the OK button. 3. The SATDUP11IMG will analyze the source drive and ensure the target drive is ready, by verifying size and format. Note: If the target drive has not been formatted as an Image drive, the SATDUP11IMG will alert you on the display screen, Press the OK button. WARNING! Formatting your HDD/SSD will delete all data stored on the target drive. 4.
5. Once the drives have been analyzed (and if necessary, formatted the SATDUP11IMG will begin to copy your SSD/HDD image to the Image Drive. 6. The image will be completely copied when the % indicator on the Display Screen reaches 100%. The image drive now contains the drive image (and if working with a non-formatted drive, an image drive has also been created.) 1.2 Image -> HDD The Image to HDD enables you to restore an HDD Image from an Image Library Drive.
1. The SATDUP11IMG will analyze the source Image Library Drive and ensure the target drive is ready, by verifying size and format. Using the UP/DOWN Navigation buttons and the Display Screen, select the drive image you would like to copy over to the target drive and press the OK button. 2. Once the drives have been analyzed (and if necessary, formatted), you will receive an indicator stating the SATDUP11IMG is ready and begin the duplication process. 3.
1. Using the UP/DOWN Navigation buttons and the Display Screen, locate 1.Copy from the on screen menu, and press the OK button, to access the [Copy] sub menu. WARNING! Proceeding will overwrite your target drive with the data on your source drive, deleting all data currently stored on the target drive. 2. Using the UP/DOWN Navigation buttons and the Display Screen, locate 3. HDD-> HDD, on the [Copy] sub menu, and press the OK button. 3.
4. The drive duplication will be complete when the % indicator on the Display Screen indicates the duplication has reached 100%. The target drive is now a duplicate of the source drive. 2. Compare The Compare function can be used after your duplication is finished, to confirm the data on the target HDD is identical to the source HDD. Run The Compare feature after your Copy task is completed. Note: Please be sure to select the sub menu option that corresponds with your Copy Selection (i.e.
4. Image Manager The Image Manager enables you to create an Image Library Drive and review details, delete, and rename drive images saved on your image drive. Refer to functions [4.1 / 4.2 / 4.3 / 4.4 / 4.5] for details. Note: Ensure your Image drive is connected to the target port on the SATDUP11IMG for the below operations. 4.1 Show HDD Info Displays Disk information from the physical hard drive being used as your image drive. 4.
4.4 Format HDD #2 Enables you to delete the data on the target drive and prepare it to be a new Image Library Drive. Follow the below steps to format and create your Image Library Drive. WARNING! All data stored on the drive connected to the target port will be deleted. 1. From the function table, select 4.Image Manager >> 4.Format HDD #2. 2. Press the okay button to confirm your format. 5. Utility From the Utility options you can access different administrative configurations and information.
5.1.3 Serial Number The Serial Number function displays the serial number of the connected HDD [Disc Info.] Serial N0.: 1. Serial Number WD-WXB1A91M3998 5.1.4 Device Power Cycle The Device Power Cycle function displays the number of times the HDD has been turned on and off. [Disc Info.] [Device Power Cycle] 99 5. Device Power Cycle 5.1.5 Power-on Hours The power-on Hours function displays the total number of hours the HDD has been powered-on. [Disc Info.] [Power-on Hours] 18 6.
5.1.7 Off-Line Scan Uncorrectable The Off-Line Scan Uncorrectable Sector Count function displays the volume of sectors that are uncorrectable when scanned off-line. The higher the uncorrectable sector volume is, the more seriously the HDD is damaged. [Disc Info.] [Off-Line Scan uncorrecta] 0 8. Off-Line Scan uncorrecta Uncorrectable Sector Count 5.1.8 Seek Error Rate The Seek Error Rate function displays the rate of error that occurs while searching for data.
5.2 System Info. The System info function displays duplicator information such as model name and firmware version. 5.3 Update System From The Update System menu you can perform a BIOS update or create an update hard drive to perform a BIOS update. Follow the steps below for details. 5.3.1 Update Bios If an update to the device firmware is available on the StarTech.com product page, this option can be used to update the device. The steps below outline the steps for executing a system update.
6. Setup From the Setup function you can access different advanced configurations. See the list below outlining the details of each option. Refer to functions [6.1 – 6.5] for details. 6.1 Copy Area The Copy Area function enables you to adjust the mode in which the hard drives are copied. Refer to functions [6.1.1 / 6.1.2 / 6.1.3] for details. 1. Select “6.1 Copy Area” using the navigation buttons. 2. From the “Copy Area” menu you can select your desired method of hard drive duplication.
6.1.2 All Partitions This mode will copy all of the partitions bit for bit including the free space. It can support all of the formats 6.1.3 Whole HDD This mode will copy the entire HDD, regardless of the content, format, partition, or free space, and it will take much more time to duplicate the source HDD completely.
6.2 Skip Error The Skip Error function allows you to define a number of acceptable sector errors during the duplication process in the event that the hard drive has bad sectors on it. 6.3 Language The Language function allows you to set is to set the language the menu is displayed in. 6.4 Advanced Setup From Advanced Setup you can adjust HDD Wait Time, and lock the keys, see details below. a) Select “6.4 Advanced setup” using the navigation buttons.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
