Instruction manual

Instruction Manual

Disk Installation

Connect the Dock to an available power outlet, using the provided 1.

power adapter.

Connect the Dock to the (powered) Host Computer, using the provided 2.

USB/eSATA cables.

Insert the 2.5” or 3.5” SATA drive(s) you wish to install, such that the 3.

SATA power and data connectors at the back of the drive are properly

aligned with the corresponding connectors inside the Dock.

Press the Power Button on the rear panel of the Dock4.

Once the drive has been inserted, the operating system will detect that

it has been connected and automatically update the drivers for proper

operation.

SATA Drive Removal

If you are using the SATDOCKU2GB/EU or SATDOCKU2EGB/EU, you

can remove SATA drives from the docking station by gently pulling them

out from the top of the dock.

If you are using the SATDOCK2UEGB/EU, the drives can be removed us-

ing the eject button that corresponds with the drive you wish to remove.

When removing the installed drive from the Dock, please ensure that you

have followed the appropriate steps (dependant on the operating system)

to disconnect removable storage. In Windows for example, click on the

Safe Remove icon located in the taskbar. Select the drive from the menu

provided, then click Stop. Select the device to disconnect, and click OK.