4 Bay 1:3 USB 3.0/eSATA to SATA/IDE Standalone Hard Drive Duplicator Dock SATDOCK4U3RE *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Front View.............................................................................
Introduction The SATDOCK4U3RE USB 3.0 and eSATA Standalone 1-to-3 Hard Drive Duplicator allows for a single SATA hard drive to be duplicated/cloned on up to three other SATA drives simultaneously. It can also function as a regular 4-bay hard drive docking station by connecting to a host computer system. Able to perform 1:3 sector duplication, including HPA, from a single SATA drive onto three others simultaneously at a rate of up to 72 MB/s, this duplicator can save time and effort.
Front View Rear View Instruction Manual 2
Installation WARNING! Hard drives and storage enclosures require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. Be sure that you are properly grounded by wearing an anti-static strap when handling computer components or discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds.
Hardware Installation (Duplicator) 1. Connect the external power adapter from the hard drive docking station to an AC power outlet. 2. Insert 2.5” or 3.5” hard drive(s) into the top loading drive bay(s). The drive containing the data to copy (Source) needs to be inserted into the “Source” bay (HDD4). Make sure that the SATA connectors on the hard drives are facing the same corner of the drive bay that has the 2.5in cutout in the door.
How to Use Menu Options 1. Copy HDD Perform a 1:1 sector clone from the Source disk to the Destination disks. Each disk sector on the Source disk will be copied, regardless if it contains data or not. If using a Destination disk larger than the Source, any extra space will be untouched and left unallocated. 2. Compare HDD Compares the sectors on the Source disk to the Destination disk. Used to ensure that the Copy operation was successful. 3.
5. Setup 5-1. Auto Compare Automatically runs the Compare HDD function after copying. OFF by default. 5-2. Button Sound Turn audio feedback (beeping) ON/OFF. OFF by default. 5-3. Device Info Lists information about the Source/Destination disks. 6. PC Mode Returns the Duplicator to Docking Station mode. 7. Advance Setup 7-1. Read Error Skip Ignore any read errors (sector or block) detected during the copying process. Normally, read errors result in cancellation of the copying process. 7-2.
Specifications Hard Drive Bays 4 SuperSpeed USB 3.0 Host Interface SATA revision 2.x Chipset ID JMicron JMB394 + JMS539 1 x USB 3.0 type B female External Connectors 1 x eSATA female* 1 x DIN (4-pin) Power female LEDs 4 x Power/Activity Fans 2 x 60mm Insertion Rating 15,000 cycles per bay USB: 5 Gbps Maximum Data Transfer Rate eSATA: 3 Gbps Duplication Rate Up to 72 MBps 2.5in and 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
