User Manual

Instruction Manual
6
Drive Status Indicators
LED Status Description
ON
An error has been detected on one or more
hard drive.
OFF
ON
RAID array is currently rebuilding.
OFF
eSATA/ USB Connectivity
The LED indicators will show which host interface is currently active on the enclosure.
To switch interfaces, shut the enclosure o and disconnect old cable and then connect
the new cable and turn the enclosure back on. Only one interface can be active at a
time, so it is recommended that only one cable be connected at a time to ensure the
proper interface is chosen.
LED Status Description
ON
eSATA connection active
OFF
ON
USB connection active
OFF