Manual

Instruction Manual
6
LED Status Description
ON
Smart Fan Auto Mode
OFF
ON
Smart Fan Manual Mode
OFF
ON
Low Speed - 1200RPM
(Manual Mode only)
OFF
ON
Medium Speed - 1800RPM
(Manual Mode only)
OFF
ON
High Speed - 2500RPM
(Manual Mode only)
OFF
Pressing the ‘Fan’ button will toggle between Auto and Manual modes and toggle
between the dierent manual fan speeds.
Synchronization Mode
This enclosure features a Synchronization Mode that allows it to power o when the
host computer it is connected to is powered o or the interface cable is disconnected.
LED Status Description
Blue
When the host connection is o, the enclosure will power
o in 15 seconds.
Orange
When the host connection is o, the enclosure will
immediately power o.
OFF
The enclosure will only power on/o via the Power
button.
Pressing the ‘Sync’ button will toggle between the dierent modes.
Troubleshooting
Only one drive shows up over eSATA
If only one of the installed hard drives is visible on the computer when connected over
eSATA, ensure that the eSATA port on your computer system supports Port Multiplier
technology.