SuperSpeed USB 3.0 to Dual 3.5in SATA Trayless HDD Enclosure SAT3520U3R *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Front View.............................................................................
Introduction The SAT3520U3R USB 3.0 to Dual 3.5in SATA Trayless Hard Drive Enclosure makes adding fast external storage easy, by turning any two 3.5in internal SATA hard drives into an external hard drive. Featuring a trayless system that eliminates having to mount and fasten the hard drive into the enclosure or tray, for quick and easy installation or removal. Using the SuperSpeed USB 3.0 interface, which is up to 10 times faster than the previous USB 2.
Front View Rear View Instruction Manual 2
Installation WARNING! Hard drives and storage enclosures require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. Be sure that you are properly grounded by wearing an anti-static strap when handling computer components or discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds.
8. Connect the USB 3.0 cable from the enclosure to the host computer system. NOTE: A USB 2.0 cable can be used in place of the USB 3.0 cable, however the enclosure will only run at USB 2.0 speeds. 9. Select the RAID mode you wish to use with the slide switch on the rear of the enclosure and press the RESET button. See “RAID Modes” for more information. 10. Once the mode is set, the drive(s) will be detected by the operating system.
Using the Storage Device Windows 2000/XP/Vista/7 If you are using brand new hard drives that do not contain any data, or after changing between RAID Modes, then you will first need to prepare the hard drive for use before you can write data to them. From the main desktop, right-click on “My Computer” (“Computer” in Vista/7), then select Manage. In the new Computer Management window, select Disk Management from the left window panel.
RAID Modes RAID Mode Normal Description Normal (JBOD) leaves the hard drives as independent disks. The operating system will treat them each separately. Different sized hard drives can be used in this mode. RAID 0 RAID 0 (Stripe) combines both hard drives into a single large disk array. Data is split in half evenly across each disk simultaneously. Read/write performance is increased as a result as is disk space, but failure of any one disk will result in permanent data loss.
Specifications Number of Drive Bays 2 Host Interface SuperSpeed USB 3.0 Chipset ID JMicron JMS551 1 x USB 3.0 type B female External Connectors 1 x DC Power 2 x Drive Power LEDs 2 x Drive Activity Fans 1 x 55mm Maximum Data Transfer Rate USB 3.0: 5 Gbps Compatible Hard Drives 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
