Instruction manual

Instruction Manual
4
Secure the drives to the Enclosure tray, 3.
using the provided screws.
Select the operating mode for your hard drive using the DIP Switches 4.
shown below. Once you have set the DIP switches according to the
desired RAID mode, press the Reset Button to save changes.
DIP Switches
Reset Button
DIP Switches
(GUI mode is shown)
DIP Switch No.
RAID Mode 1 2 3 4
GUI** (Requires Software Installation)
ON ON ON OFF
JBOD*
ON OFF OFF OFF
BIG
OFF OFF OFF OFF
RAID 0 (Fast)*
OFF ON OFF OFF
RAID 1 (Safe)
ON ON OFF OFF
RAID/SAFE33*
OFF OFF ON OFF
RAID/SAFE55*
ON OFF ON OFF
*denotes Port Multiplier requirement
** Please see pg. 11 for more details on GUI Mode