M.2 NGFF SSD to 2.5in SATA SSD Converter SAT32M225 *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Diagram.....................................................................................1 Front View..................................................................................................................................................... 1 Rear View....................................................................................................................................................... 1 Introduction......................................................
Product Diagram Front View 1. SATA DATA & Power Combo (7+15 pin) 2. Side mounting holes Rear View 1. M.2 (NGFF) SSD Connector 2. Drive installation bracket 3. Drive length adjustment holes 4.
Introduction Packaging Contents • 1 x M.2 NGFF SSD to 2.5in SATA SSD Converter • 1 x Mounting screw kit • 1 x Installation manual System Requirements • M.2 NGFF Drive • SATA Host Device M.2 NGFF SSD Installation WARNING! SSD Drives and storage adapters require careful handling. If you are not careful with your SSD Drive, lost data may result. Always handle your drive with caution.
2. (Only required if the drive installation bracket requires relocating) Remove the screw holding the bracket in place on the reverse side using a Philips head screw driver (Not included). Note: There are screws located on either side of the bracket, ensure the reverse screw is the one removed, see photo below. 3. (Only required if the drive installation bracket requires relocating) Reseat the drive installation bracket in the drive installation hole that matches your SSD.
4. Using a Phillips head screw driver (not included). Remove the screw located in the front of the hard drive installation bracket. Note: There are screws located on either side of the bracket, ensure the front screw is the one removed, see photo below. 5. Slide the M.2 connector on the SSD into the M.2 receprical connector on the SAT32M225. Note: The connector on your M.2 SSD is keyed so the drive will only fit one way. 6.
7. The SSD has now been installed, and is ready to be implemented in your 2.5” SATA drive application. Refer to the manual for your SATA host device for installation instructions. The top or side mounting holes and included screw kit may or may not be required to assist in your installation. Hard Drive Initialization If the M.2 SSD is new or otherwise blank, it may need to be initialized and formatted before use. Follow the steps below in a Windows interface to initialize the drive. 1.
2. A dialog window should automatically appear, asking you to initialize the drive. Depending on the version of Windows, it will give you the option of either creating an “MBR” or “GPT” disk. GPT (GUID partition) is not compatible with some older operating systems, while MBR is supported by newer and older operating systems. 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
