2.5 SATA External HDD Enclosure w/ 3.5/5.25 Front Drive Bay SAT2510U2REM *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction ............................................................................................1 Features......................................................................................................................................................... 1 Package Contents...................................................................................................................................... 1 System Requirements...................................................
Introduction Thank you for purchasing a StarTech.com 3.5” Bay Removable 2.5” SATA Drive Enclosure. This product offers versatile functionality, acting as either an internal desktop removable drive enclosure, or an external drive enclosure. Ideal for entry-level servers, network attached storage systems or applications requiring data transport from one location to another, SAT2510U2REM is the perfect solution for data mobility.
Installation Drive Bay Drive Enclosure Drive Bay Bracket WARNING: Hard drives require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. WARNING: Hard drives, like all computer equipment can also be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching any components. StarTech.
Installing the hard drive in the drive enclosure 1. Remove the two screws from the rear panel of the Drive Enclosure. Remove the rear panel of the Drive Enclosure. 2. Remove the circuit board from the drive enclosure. 3. Attach the 2.5” SATA hard drive to the circuit board, and fasten it to the board using drive mounting screws. 4. Once the hard drive has been secured on the circuit board, replace the circuit board (with hard drive attached) in the drive enclosure.
Installing the drive bay in the computer Please note that the SAT2510U2REM drive bay can be installed into either a 3.5” or a 5.25” drive bay slot on the host computer, using the included 5.25” Drive Bay Bracket. If you wish to install the Drive Bay directly into the drive bay slot provided by the host computer, please skip steps 1 and 2 in the instructions that follow: 1. Insert the Drive Bay into the 5.
. Connect one end of the SATA cable provided to the SATA port located on the rear panel of the Drive Bay. Connect the remaining end of the SATA cable to an available SATA connector as provided by the computer motherboard. 9. Once the Drive Bay has been installed in the computer, replace the side panels of the computer casing (removed in step 3).
Connecting the Drive Enclosure - Standalone To connect the Drive Enclosure to the host computer, for use as standalone storage: 1. Insert the small connector (USB Mini-B) into the USB Mini-B port located on the rear panel of the Drive Enclosure. Insert the remaining end (USB type A) connector into an available USB port on the host computer. 2. Insert the cylindrical connector provided by the power adapter into the power port on the rear panel of the Drive Enclosure.
Specifications Internal Mount: 5.25” drive bay or 3.5” drive bay Form Factor 3.5” Internal Bay: External to Host - 4 pin power input 7 pin SATA Internal to HD enclosure - 7 pin and 15 pin SATA 2.5” HD Enclosure: External ports - USB 2.0 mini B DC 5V power to USB Internal - 7 pin and 15 pin SATA Connectors Power Adapter External Use - 5V DC to USB 2.0 SATA to SATA USB Mini B to USB Type A 4 pin power to LP4 5V DC to USB 2.0 Cables Internal data transfer rate: up to 1.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
