SAT2510BU2B Instruction Manual USB 2.0 External Hard Drive Enclosure 2.5” Black USB 2.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction...................................................................... 1 Packaging Contents.....................................................................1 System Requirements..................................................................1 Installation........................................................................ 1 Hardware Installation....................................................................1 Driver Installation...................................
Introduction Packaging Contents • 1 x SAT2510BU2B enclosure • 1 x USB ‘Y’ Cable • 1 x User Manual • 1 x Software CD System Requirements • USB 2.0 enabled computer • Microsoft Windows® 98SE/ME/XP/Vista, Mac OS® X Installation Hardware Installation 1. Open the case by pinching the ejection pinhole with a small tipped object and sliding off the back cover of the case.
2. Place the HDD into the case and slide it into the SATA connector. 3. Place the foam to fill up the gap between the HDD and enclosure. Assemble the case by sliding on the back cover. No screw is needed.
Driver Installation Microsoft Windows® 2000 or later, and Mac OS® 10.x do not require driver installation, as this enclosure is natively supported. Installation for Windows® 98SE/ME 1. Insert the software CD into the CD-ROM drive. 2. If Autorun does not play automatically, double-click “autorun.exe” from the CD. 3. Follow the instructions in the pop-up window for installing the 98/ME driver. 4. Make sure to install the correct driver for your HDD. Backup Software Installation 1.
pop-up windows then select “Options”. Check the Enable “One Touch Backup” column.
Specifications Interface USB 2.0 (backwards compatible with USB 1.x) External Connectors 1 x USB type B 1 x DC power connector Internal Connectors 1 x 7-pin SATA data 1 x 15-pin SATA power Hard Drive type 2.5” SATA hard drive, 9.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commit-ment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
