USB 3.0 to 2.5” SATA HDD Enclosure with Encryption S2510BU3PWPS *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Product Diagrams......................................................................
Introduction Packaging Contents • 1x USB 3.0 to 2.5” SATA HDD Enclosure w/ Encryption • 1x Carrying Pouch • 1x USB 3.0 Cable • 1x Instruction Manual System Requirements • Computer system with available USB 3.0 port (5 Gbit/s) or USB 2.0 port (480Mbps) • 2.5” SATA hard drive or solid state drive (9.5mm height) • Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7/8 (32/64-bit), or Apple® Mac® OS 9.
Product Diagrams Top View Operation LEDs Keypad Front View USB Port Instruction Manual 2
Hardware Installation WARNING! Hard drives and storage enclosures require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. Be sure that you are properly grounded by wearing an anti-static strap when handling computer components or discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds.
3. Slide the back pane back into place. 4. With the enclosure fully assembled, connect the USB 3.0 cable from the enclosure to a USB port on the host computer system using the included cable.
How to Use Initial Setup 1. When connected to a host computer for the first time, the “2_Input new password, and then press `Enter`” LED will prompt. If no password is used, the enclosure will function as a standard external hard drive enclosure without any encryption. 2. Enter your own Password (1~8 digit PIN setting) and press the ‘Enter’ button. 3. After pressing the `Enter` button, the “3_input password and then press ‘Enter’ button” LED will turn on.
6. Once initialized, locate the Disk that says it is “Unallocated” (check the listed hard drive capacity to confirm it’s the correct hard drive) and then right-click in the section that says “Unallocated” and select “New Partition”. WARNING! Losing the password or hardware failure (the SATA drive or enclosure) will result in the data stored in the enclosure becoming unrecoverable. Removing the drive from the enclosure or placing it into another S2510BU3PWPS enclosure will not allow access to the data.
HDD Connection / Disconnection (Smart Mount/Un-mount function) Press Button over 2 seconds Safely un-mounts the hard drive from your computer, to help prevent in data loss and drive damage. NOTE: Ensure there are no active data transfers prior to performing procedure. Specifications Host Interface USB 3.0 Chipset ID Fujitsu MB86C311 External Connectors 1 x USB 3.0 female Encryption Type AES-256bit Power Adapter USB Powered Enclosure Material Plastic Maximum Data Transfer Rate USB 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.