User Manual

Instruction Manual
9
Initialize HDD
The installed SATA drive can be re-initialized while connected to the host computer,
which will result in the drive partition being deleted and drive being treated as a new
drive (usage timer will also be reset). The SATA drive will need to be re-partitioned
and formatted on the host computer afterwards.
WARNING: This will result in all data on the drive being lost.
Additional Functions
Smart Mount/Unmount
Instead of unmounting the USB enclosure through the operating system, the
enclosure has a built in feature that can disconnect it from the host computer.
Pressing and holding the <Menu> button for 2 seconds will automatically disconnect
the enclosure from the host computer. Pressing and holding the <Menu> button
again for 2 seconds will reconnect the enclosure with the host computer.
WARNING: Make sure no data is being written or read from the drive when using this
function. Doing so may result in damage and/or loss of data.