Owner's manual

Instruction Manual

How to Use Virtual iSO

Initial Setup

NOTE: For ISO functionality The File System on the Hard Drive must be NTFS. ISO

function is supported on Mac and Linux based operating systems. However, the NTFS

requirement limits the ISO creation to Windows based computer systems.

1. Connect the enclosure to a host computer using the included USB 3.0 cable. The

native external Hard Drive drivers will be automatically installed.

2. Press the “<Mode” button to toggle and light the LED next to HDD.

3. Once the system has completed hard drive installation, Open Windows Explorer and

access the Root Directory on the External Hard Drive.

Click Start -> Computer -> Select Hard Drive

4. On the main directory of the Hard Drive, create 1 new folder for each ISO le you

would like to add (up to 3).

Right click on the Windows Explorer background -> New Folder

Name the folders as follows:

_iso1

_iso2

_iso3

NOTE: While the names are not case sensitive, the characters must be listed exactly as

above including the underscore (_) at the beginning.