Installation guide

RAS Server Mode
Windows-based devices that have Remote Access Services (RAS) client capability but are not equipped with a direct
network interface can access the network through a serial port using the Point-to-Point Protocol (PPP).
The serial port of the RAS client device is attached to the serial port of the NETRS232, configured in RAS Server mode.
The RAS negotiations are conducted between the RAS client and the NETRS232 RAS server.
In the initial negotiations between the RAS client and the NETRS232, an IP address (configured by user) is assigned to
RAS client, which is used for all Ethernet communications related to the RAS client.