Instruction manual

2. Install the rails into the cabinet:

3. Tighten the screws that were loosened in Step 1:

4. Install the remaining rail, repeating Steps 1-3.

5. Slide the Module onto the Console side rails, connecting the Module

and Console using the male Centronics connector provided by the

Console, and the female Centronics connector provided by the

Module. Ensure the connection is secure, and that the module is

ﬁrmly seated within the Console side rails.

6. Gently, but ﬁrmly insert the Console (with Module attached) into the

left and right rails: