U 17”/19” Rackmount LCD Console – USB – Value Series RACKCONV1701 RACKCONV1901 *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 Installation...............................................................................................1 Hardware Installation.........................................................................................................
Introduction Packaging Contents • • • • • • 1U LCD Rack Console Drawer VGA cable USB cable Mounting Rails - Set Power Adapter Power Cord Installation Hardware Installation Hardware Kit Contents Screw kit Side Rails with front and rear brackets (2) (Used to attach Rail Mount to Console body) • Please check that all packaging contents are present before installation. Make sure that nothing was damaged and/or lost during shipping process. If you encounter any problem, please contact your dealer.
Mounting the console 1. Adjust the sliding rail until the screw underneath is visible. Loosen (do not release) the two rear screws then adjust the rear bracket to fit the depth of your rack: 2.
3. Tighten the rear screws that were loosened in Step 1: 4. Install the remaining rail, repeating Steps 1-3. 5. Gently, but firmly insert the console into the left and right rails: 6. Install two screws on each side of the rear console: 7. Installation is now complete.
How to Use Connecting the Console VGA input Power Connector USB output To connect the LCD console to a computer, perform the following steps: 1. Turn off your computer. 2. Connect the VGA video cable from the VGA output on the computer system to the VGA port on the rear of the rack console. 3. Identify and connect the USB connector on the rear of the rack console to a USB port on the computer system. 4. Connect the AC power cord to the power inlet on the console.
Each video card has several controls that allow you to adjust the display settings, however, the software and driver for each video card is unique. In most cases, you can adjust these settings using a program or utility provided by the manufacturer of the video card. Most video cards use the Windows Display Properties control panel to configure the display. To open the Windows Display Properties, click the right mouse button in a blank area of the Windows desktop and then select Properties.
Panel Controls and OSD Functions The following controls are located on the left side of the the console monitor: Controls Descriptions Soft power on/off. Adjacent LED is lit when on. Auto Auto-synchronize and scale down display to any valid factory preset timings. Up Press to scroll to the function you want to adjust. Down Press to scroll to the function you want to adjust. Menu To access the main menu. This button also acts as the Enter button. Auto tune Press the “Auto tune” button.
Color 1. Press the Menu button. 2. Use the Down and Up button to scroll. 3. Highlight Color, and press the Menu button to enter, which will launch the following screen: Icon Description 9300°K To set CIE coordinates at 9300°K color 7500°K To set CIE coordinates at 7500°K color 6500°K To set CIE coordinates at 6500°K color User To set user defined CIE Auto color To automatically adjust color Return To exit and return to the previous page 4.
Language 1. Press the Menu button. 2. Use the Down and Up buttons to scroll. 3. Highlight Language, and press the Menu button to select, which will launch the following screen: English German French Italian Spanish 4. Use the Down and Up buttons to scroll, and highlight the preferred language. 5. Press the Menu button to save your selection. Recall 1. Press the Menu button. 2. Use the Down and Up buttons to scroll to Recall.
Specifications RACKCONV1701 Display Size Panel Type Resolution Capabilities RACKCONV1901 17” 19” Active Matrix TFT LCD 1280x1024 @ 60Hz (max.) Back Light four lamps Supported 16.
RACKCONV1701 Dimension Net Weight Chassis Construction RACKCONV1901 509.2mm x 477.6mm x 43.7mm 549.2mm x 477.6mm x 43.7mm (20.1” x 18.8” x 1.7”) (21.6” x 19.8” x 1.7”) 10.4kg (22.9lbs) 11.2kg (24.
RACKCONV1701 Dimensions RACKCONV1901 Dimensions Instruction Manual 11
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
