Wireless Display Adapter for Mobile Devices WIFI2HDMC / WIFI2HDMCGE *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Diagram.....................................................................................1 Rear View....................................................................................................................................................... 1 Side View....................................................................................................................................................... 1 Introduction.....................................................
Specifications...........................................................................................28 Technical Support...................................................................................29 Warranty Information.............................................................................
Product Diagram Rear View HDMI Out Analog Audio/Video out RJ45 LAN Power On/Off (For included 4 position A/V cable only) Side View Mode Select Button USB Media Input Instruction Manual 1 DC Jack
Introduction Packaging Contents • 1x Wireless Display Adapter • 1x Universal Power Adapter (NA/UK/EU) • 1x USB Cable to Power Adapter Port (optional for USB Power source) • 1x 4 position A/V cable • 1x Software Installation Disc • 1x Quick Installation Guide System Requirements • HDMI enabled display device (i.e. television, projector) • 802.11n/g Wireless enabled video source device (i.e. Smartphone, computer) • HDMI cable • Available AC electrical outlet or USB power source Preparing Your Site 1.
Hardware Installation 1. Connect an HDMI video cable from the HDMI out port on the Wireless Video Adapter to the HDMI in port on the HDMI enabled display device. 2. Connect the power adapter from an available AC outlet to the power adapter port on the Wireless Video Adapter. or Connect the USB to power cable from an available USB power source to the power adapter port on the Wireless Video Adapter. 3. Press the Power button to the in position to turn on the device, the Power LED will be activated. 4.
Initial Setup Once the WIFI2HDMC device is connected to your TV and powered on, the following screen will show on the display. 1. Connect your Smartphone / Tablet or Notebook to the SSID of the device. By default the SSID for the device is “WIFI2HDMC xxx” with no security key. 2. Once you have connected to the device, open your web browser and enter the Setup IP address listed on the display which will bring up the remote control interface. The default is http://192.168.59.254/remote 3.
4. From the Initial Setup menu, modify the following options to suit your application. Language: Select your desired language for the interface. TV System: Configure WIFI2HDMC to use a specific resolution if needed. Note: It is recommended to leave this option as HDMI Auto WiFi Connection (optional): You may want to connect the device to your WiFi network for one of the following reasons. a. Create a network bridge.
5. Once complete, you should see the following screen to indicate the device is ready to stream media. Playing Media from a USB Stick 1. Connect your Smartphone / Tablet or Notebook to the WIFI2HDMC device and navigate to the Setup (remote) page using a web browser. 2. Plug your USB stick into the port located on the side of the WIFI2HDMC device. 3. Navigate the USB stick contents using the web remote to choose the video, music or picture file you would like to view.
AirFun Utility Installation The AirFun utility is available for PC (on the included software CD), iPhone or Android platforms. Android / iPhone 1. Download and install the latest version of the AirFun utility from your mobile app store PC 1. Insert the included software CD into the computer’s CD/DVD drive, or download the latest drivers from http://www.starTech.com. 2. Run the Autorun.exe application from the Autoplay menu.
5. Follow the on screen instructions to complete the installation(s). Operation Note: AirFun is one example of a utility that functions with the device; WIFI2HDMC is designed to work with any DLNA/UPnP software (e.g. BubbleUPnP, Windows Media Player 11+, etc.). Android / iPhone 1. Open the AirFun app and it will begin to search for the WIFI2HDMC device.
2. Once found, tap the buttons for either Photo/Music Playback or Video Playback and choose the file you wish to view / play.
PC 1. Double-click the AirFun icon from your Desktop or Start Menu. 2. The AIRFUN utility will begin to search for the WIFI2HDMC device. If the device is not found before the timeout period, it will display “No device found”. 3. If successfully connected, you should be able to see your PC screen on the TV. 4. Drag the video/photo/music file to the Airfun main menu directly. For video files, please drag files to the right folder marked Video Playback.
5. For photo/music files, please drag files to the left folder marked Photo/Music Playback. ScreenShare Mode Installation 1. Insert the included software CD into the computer’s CD/DVD drive. 2. Run the Autorun.exe application from the Autoplay menu. If Autoplay is disabled on your system, browse to your CD/DVD drive and run the application.
3. On your Notebook / PC, search and connect to the WIFI2HDMC’s SSID in list if you intend to connect directly to the device. or If the device has been pared with your local WIFI/Wired Network, ensure that your computer has been connected to that specific network gateway. (Contact your network administrator for assistance 4. Choose Typical Installation from the following screen and click Install. Note: This will install both the AirFun and the ScreenShare utilities (outlined later in this manual).
Operation 1. Switch the WIFI2HDMC device into ScreenShare mode by pressing the Mode Select Button twice (located next to the USB connector). 2. The following screen will display on the TV, note the Login Code displayed in the top right corner of the screen. 3. On your Notebook / PC, search and connect to the device’s SSID in wifi list.
4. Double-click the ScreenShare icon from your Desktop or Start Menu. 5. ScreenShare will auto detect the WIFI2HDMC device, please input login code as noted from instruction page (Step 2), then click OK. 6. If login code is correct, application software will appear.
# Name Function Description 1 Play Start / pause presentation. When pausing a progressing presentation, the displayed image will freeze; press play button again to resume. 2 Stop Stop a presentation and go back to the instruction page. 3 Mute Mute volume. 4 Volume up/ down Volume up/down. 5 Minimize/ Close Minimize and close the Application Software window. 6 Information Show the application information. 7 Menu Show the application information.
Panel Control # Name Function Description 1 Play Star/Pauses presentation 2 Stop Stop presentation HDMI Resolution Instruction Manual 16
Web Page Information For more information, please check 3-2 Information. Exit Exit from ScreenShare application and go back to the instruction page. Wifi Direct – Miracast mode NOTE: Exact steps regarding Miracast setup will vary from device to device. Please review the documentation included with your SmartPhone or tablet for steps specific instructions. The following sections will indicate a few examples of how to connect in this mode. 1.
Android Wireless Display (Android 4.2 or higher) 1. Open the Settings menu. 2. Select Display, then Wireless Display 3. Turn Wireless Display ON and select the Available Device from the list. By default the Wireless Video device will be listed as the MAC address shown on the HDMI display. Tap this device to connect. The device should connect after a few seconds. Note: Analog Audio/Video not supported in Miracast mode.
AllShareCast (Samsung) 1. Open your mobile Settings page. 2. Select More Settings. 3. Scroll through the list and select AllShare Cast.
4. Turn AllShare Cast ON and select the Available Device from the list. By default the Wireless Video device will be listed as the MAC address shown on the HDMI display. Tap this device to connect. The device should connect after a few seconds. Intel WiDi Application 1. Open the WiDi software included with your Wi-Di enabled computer system. 2. The adapter will be listed under detected adapters, select the adapter and click Connect. 3. Your computer screen will now be shared wirelessly on the display.
Windows 8.1 Wireless Display 1. Launch the charm window and select Devices (or search for Device Settings from Metro). 2. Select Project, then Add a wireless display (or Add a Device). 3. Select the WIFI2HDMC from the list of devices (the MAC address will be listed).
4. Enter the PIN code on the WIFI2HDMC screen, then click Next. 5. The device should connect after a few seconds. Note: Some Windows 8.1 machines may have problems connecting in Miracast mode. Please ensure you are using the latest Graphics drivers and Wireless drivers for your computer. Contact your manufacturer for support.
Network Wired Connection Item Description Obtain an IP address Automatically WIFI2HDMC will obtain an IP address from DHCP server automatically. Set WIFI2HDMC IP address manually Set WIFI2HDMC IP address manually. Fill the fields below to setup your desired IP address. DNS Server Please input the IP address of the DNS (Domain Name Service) server.
Device Name Item Description Device Name (SSID) Input the Device Name of presentation gateway here. Default is “WIFI2HDMC”. WiFi Connection Click WiFi connection button to display a list of available Wireless APs on the screen, and choose the AP you wish to connect to. This will bridge WIFI2HDMC to the Internet via another Wireless AP. Virtual AP Setup Item Description Set the Radio band to 2.4GHz or 5GHz.
Virtual AP Bridge Item Description Virtual AP only Ad-hoc mode Bridge to Wireless Connect to Internet via Wireless AP router (outlined below) Bridge to Ethernet Connect to Internet via Wired AP router (outlined below) Bridge to Wireless connection 1. Change Virtual AP Bridge to “Bridge to Wireless” and click Apply. 2. Click Wireless connection button. The Wireless AP list will display on the screen. 3. Choose the AP you want to connect to. Bridge to Ethernet / Wired Connection 1.
Audio Adjust advanced audio settings such as Night mode, HDMI Audio output format, SPDIF output format, Surround sound setting and Lip Sync setting from this page. Video Adjust Aspect Ratio, TV out video format, and other video settings from the video setup page.
System Set the OSD Language, reset to Factory Default, check the firmware Version, and perform a firmware upgrade from the system setup page.
Specifications Audio Support Yes Cabling Wireless Ethernet Output Signal HDMI Number of Ports 1 1 - 3.5 mm Mini-Jack (3 Position) Female 1 - HDMI (19 pin) Female Connector(s) 1 - RJ-45 Female 1 - USB 3.0 A (9 pin; SuperSpeed) Female Wireless N (IEEE 802.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
