POEINJ100 POESPLT100 Instruction Manual Power over Ethernet 10/100 POE Power over Ethernet Injector - 48V 10/100 POE Power over Ethernet Splitter - 5V/12V Manual Revision:05/06/2011 For the most up-to-date information, please visit www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction............................................................... 1 Packaging Contents............................................................. 1 System Requirements.......................................................... 1 Side View - POEINJ100........................................................ 2 Side View - POESPLT100.................................................... 2 Installation................................................................. 3 POEINJ100.......
Introduction The POEINJ100 10/100 Mbps device converts standard 90-260V AC power into low-voltage DC power that can run over existing Cat5 or higher network cable to power IEEE 802.3af/at compliant network devices, or the POESPLT100 PoE Splitter. The POESPLT100 splitter device separates the data and power connections received from the Injector device and offers a selectable 5, 7.5, 9 or 12V output switch allowing you to customize the power output to suit your requirements.
Side View - POEINJ100 Side View - POESPLT100 2
Installation POEINJ100 This should be the side that does not require Power over Ethernet. 1. Connect the Ethernet cable from the source network device (i.e. computer, router, switch, etc) to the “Data (In)” RJ45 connector on the input side of the POEINJ100 unit. 2. Connect the included power adapter to the POEINJ100 unit. 3. Connect an RJ45 terminated Ethernet cable to the “Power + Data (Out)” connector on the output side of the POEINJ100 unit.
Specifications POEINJ100 Compliant Standards IEEE 802.3af IEEE 802.3at IEEE 802.3 IEEE 802.3u Connectors 2 x RJ45 Ethernet female 1 x DC Power type N LEDs 2 x RJ45 Link PoE Output 48VDC, 30W Link Speeds 10/100 Mbps Maximum Cable Length 100 m / 330 ft Power Adapter 48VDC, 880mA, type N plug Operating Temperature 0°C ~ 40°C (32°F ~ 104°F) Storage Temperature -20°C ~ 85°C (-4°F ~ 185°F) Humidity 10% ~ 90% RH Dimension (LxWxH) 102.0mm x 75.0mm x 23.
POESPLT100 Compliant Standards IEEE 802.3af IEEE 802.3at IEEE 802.3 IEEE 802.3u Connectors 2 x RJ45 Ethernet female 1 x DC Power type N LEDs 1 x RJ45 Link PoE Input 48VDC, 30W Power Output 5 / 7.5 / 9 / 12V DC, up to 19.2W peak Link Speeds 10/100 Mbps Operating Temperature 0°C ~ 45°C (32°F ~ 113°F) Storage Temperature -20°C ~ 90°C (-4°F ~ 194°F) Humidity 10% ~ 90% RH Dimension (LxWxH) 102.0mm x 75.0mm x 23.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
